| Optical Fusion Splicer CSP-360 | |
|
|
|
Technical Information |
Type: Optical Fusion Splicer
Order£º
Order Now
Summary:
Both X and Y axis display
Large multiple & visible fiber core
Turn-over display screen to use conveniently
Inner light to set fiber at night
Auto check end-face of fiber
Auto calculate splicing loss
Auto select suitable fusion program
Small bulk and light weight & alternating /Direct Current available
Screen menu for simple operation
Concave weatherproof cover & Max. wind velocity of 15m/s
Description
Application:>>> SM (Single-mode), MM (Multi-mode) silex-fiber 125¦Ìm outer diameter (standard)SM cord 4-14¦Ìm, MM cord 50,62.5¦Ìm Fiber cleaved length: 16mm(standard)
Specifications:>>>
Average splicing loss: 0.01dB MM/0.02dB SM (standard measure)Typical splicing time:10s, typical heating time:60s, wave-return loss better than 60dB
Program:>>>100units SM fusion program, 100units MMfusion program
Storage:>>>
5000 results
Heater:>>>
Optional outer heater, can heat 4 protecting sleeves at same time
Screen display:>>>
Display X-axis and Y-axis at the same time,display current time and date, display current work mode
Dimension:>>>
172mm(L) x180mm (W) x145mm (H) (Without battery module)
Work mode:>>>
Program/Splicing/Heating: Automation or manual optionally
Environment:>>>
Temperature: -10¡«50¡æ Storage:-40¡«60¡æHumidity: <95%RH (without dew) Work altitude: 0~4000 meters
Power Supply :>>>
Alternating Current: 100-220V 50/60Hz 30W Direct current:10¡«14V 25W Examining Power supply real time(optional)Inner Li-ion battery charger and AC adaptor  |
|
| Optical Fusion Splicer CSP-380 |
|
|
|
Technical Information |
Digital fusion splicer with automatic focus function
Advanced automatic fore alignment(PAS)and fully automatic operation
Both X and Y axis display,or display X and Y axis alone,auto check quality of cleaved end-face
Small bulk and light weight with optional function
9seconds splice time and 30 seconds heat time
5.6inch color LCD screen with clear digital image display
Large multiple&visible fiber core
USB port&VGA interface
Concave weatherproof cover & Max.wind velocity of 15m/s
|
|
|
Specifications |
Applicable fibers |
SM(ITU-T G.652)¡¢MM£¨ITU-T G.651£©£¬DS£¨ITU-T G.653£©£¬NZDS£¨ITU-T G.655£© |
Fiber Count |
Single |
Cladding diameter |
80 to 150¦Ìm |
Coaging Diameter |
100 to 1000¦Ìm |
Fiber cleaved length |
8 to 16mm with coating diameter of 250¦Ìm or less.16mm with coating diameter of 250 to 1000¦Ìm.Optional Set-plate for 8 to 16mm with coating diameter of 250 to 1000¦Ìmis available |
or |
Actual average splice loss |
0.02dB with SM,0.01dB with MM,0.04dB with DS.0.04 dB with NZDS Measured by cut-bak method relevant to ITU-T and IEC standards |
Splicing time |
9S |
Return loss |
£¾60dB |
Splicing mode |
40 modes |
Splice loss estimate |
Available |
Storage of splice result |
The last 4000 result to be stored in the internal memory |
Fiber display |
x/Y.or both X and Y simultaneously;200/400 magnification times |
Magnification |
280x for single X or Y view;or 140x for X and Y view |
Viewing method |
Two CMOS cameras and 5.6 inch color LCD monitor |
Operating condition |
0 to 5000m above sea level.0 to95%RH and -10 to 50¡æ respectively |
|
|
|
|
Configuration |
|
|
|
