About us FTTH catalogue HFC catalogue Contacts
CONTENT
  FTTH catalogue -> Optical equipment and CATV equipment
CSP68L TV Signal Demodulator
  • Imported high-quality large-scale framework, controlled by microcomputer. The synthetic technology of frequency. All function panels are operating properly. I2C control super integrated circuit, PLL technology, reach the 48~860MHz
CSP88 860MHz Adjacent Channel Modulator
  • CSP88 series intelligent adjacent channel modulator is high-performance type front-end equipment, and mainly used as video and audio signal adjacent channel modulating. The equipment adopts advanced if-frequency dealing and PLL technology, high frequency stability and small signal distortion. Suitable for constructing large or middle-size CATV system .
CSP98 Satellite TV Receiver
  • CSP98 series satellite TV receiver is according to DVB-S standard adopting Fujitsu single-chip processor with high delicacy signal receiver function, and is a perfect digital satellite TV receiver
CSP-2000 CATV OPTICAL FIBER TRANSMISSION SYSTEM
  • The new style of Switching Power, reasonable volume, Low power consumption, high efficiency of transformation and Power output; There are two WOS-2001 Module at max under hot backup operating.
CSP8604G,CSP7504G Field Optical Work Station
  • CSP8604G, CSP7504G Field Optical Work Station are based on several years developing CATV top products advanced technology and rich experience. Adopt foreign high index module, and has network management. Advanced technology, high index, and high performance to price ratio, suitable large or middle size CATV city network.
OT1550 External Modulation Optical Transmitter
  • Adopt several international patents pre-distortion dealing technology to guarantee the fine non-linear index.
  • Adopt famous brand 1550 nm DFB laser instrument guarantee low noise, high power and high dependability.
  • Can initiate the mode SBS function, offer more elastic disposition.
  • Adopt Automatic Gain
EDFA 1550 CATV Erbium-Doped Fiber Amplifier
  • Imported erbium-doped fiber, and high steady imported 980nm pump laser or 980nm cooperating 1480nm pump (double pump structure), so noise is lower.
  • Microprocessor automatic control circuit makes both pumps work at best state. Dependability and stability are better.
  • Front panel blue VFD display, shows various main work status parameters.
  • Various output power for selection.
OT8600 Series 1310nm Laser Transmitter
  • Adopt word-famous company (AGERE, Fujitsu or selected by user) advanced DFB laser instrument; max output optical power reach 30mW.
  • Add advanced RF pre-distortion circuit, to use as proofreading CATV system most important CTB and CSO index, and to improve C/N index.
  • Adopt RF digital automatic control technology. It can automatically adjust drive level and make C/N, CTB, CSO index always in best state based on input RF level, number of channels.
  • Adopt high performance Gallium Arsenide RF amplifier, let index higher.
OR2004R 4-output Return Optical Receiver
  • Each module independent receive and amplify. Output level is independently adjustable.
  • 19" 1U standard case installation.
  • Build integrated bi-directional alternation system for user.
  • Adopt U.S. E-O or PHOTON optical receive parts with small distortion and high sensitivity.
  • Adopt Philips microwave tube push-pull amplify circuit with high index and good C/N.
CSP8030 FTTH Optical Receiver
  • Mini FTTH optical receiver.
  • Frequency bandwidth: 5-862MHz.
  • Two LEDs in the front panel indicate the input power.
  • High range switching power supply.
  • Adjustable attenuator (-15~0dB).
  • Adjustable equalizer (-15~0dB).
  • 2 output ports or 1 outpt and 1 test point -30dB.
  • Model 220 and 60V.
CSP8130 Optical Receiver
  • high quality PIN-diode optical receiving module.
  • Four-stage input level LED display.
  • Wide range of input optical power.
  • PHILIPS Power Doubler output module.
  • Two outputs with plug-in splitter.
  • Plug in return path module.
  • Models with local and remote powering.
  • Switch-mode power supply.
  • weatherproof and RF-screened die-cast housing.
CSP8230 Optical Receiver
  • High quality PHOTON optical receiving module.
  • Four-stage input level LED display.
  • Wide range of input optical power.
  • PHILIPS Power Doubler output module.
  • Two outputs with plug-in splitter.
  • Plug in return path module.
  • Models with local and remote powering.
  • Switch-mode power supply.
  • Weatherproof and RF-screened die-cast housing.
CSP8330 Optical Receiver
  • High quality PHOTON or PHILIPS optical receiving module.
  • Four-stage input level LED display.
  • Wide range of input optical power.
  • PHILIPS Power Doubler output modules.
  • Four outputs with plug-in splitter.
  • Plug in return path module.
  • Models with local and remote powering.
  • Switch-mode power supply.
  • Weatherproof and RF-screened die-cast housing.
  Optical equipment and CATV equipment
     CSP68L TV Signal Demodulator
     CSP88 860MHz Adjacent Channel Modulator
     CSP98 Satellite TV Receiver
     CSP-2000 CATV OPTICAL FIBER TRANSMISSION SYSTEM
     CSP8604G,CSP7504G Field Optical Work Station
     OT1550 External Modulation Optical Transmitter 1550nm
    EDFA 1550 CATV Erbium-Doped Fiber Amplifier
    OT8600 Series 1310nm Laser Transmitter
    OR2004R 4-output Return Optical Receiver
    CSP8130 Optical Receiver
    CSP8230 Optical Receiver
    CSP8330 Optical Receiver
Optical measuring and splice equipment
Optical cable
Optical accessories
©  www.catvscope.com